MAIL US
MAIL US
Looking for a crane in Pune usually comes down to three questions: what capacity do you need, what will it cost, and how quickly can it reach your site? This page gives you practical guidance before you book.
Udaan Crane Service has provided crane rental in Pune since 2016 for construction, industrial lifting, machinery installation, plant maintenance and material handling. Our work takes us across Pune and Pimpri-Chinchwad, including industrial areas, construction corridors and commercial sites where access, lifting radius and timing matter as much as crane capacity.
Our fleet includes hydra, mobile, hydraulic, tower, crawler and pick-and-carry cranes, along with boom lifts. We select the machine according to the load, lifting radius, height, access and ground conditions rather than simply sending the largest crane available. Required machine and operator documents are provided before deployment where applicable.
If you already know your load details, call or WhatsApp 9503066820. If you are still deciding, use the fleet, capacity and pricing sections below to understand the likely crane type and the information we need to prepare an accurate quotation.
Pune combines dense urban construction with major industrial corridors around Pimpri-Chinchwad, Bhosari, Chakan, Talegaon and Ranjangaon. A high-rise site, factory shutdown, rooftop installation and machinery move can all require very different cranes even when the load weight looks similar.
The right selection depends on more than tonnage. Lifting radius, boom reach, access width, ground condition, overhead obstructions, setup space and the time available for the job can change the machine requirement. Choosing too small a crane creates safety and scheduling problems; choosing far more capacity than needed can raise mobilisation and rental cost unnecessarily.
Before dispatch, we review the job details, recommend a suitable machine and confirm the quoted scope in writing. For lifts that need closer planning, a site visit and lift plan can be arranged before the crane is mobilised.
The best crane is the one that fits the load, radius, access and working conditions. Here is a practical guide to the machines available and where each type is most useful.
The workhorse of Pune sites. It drives itself onto site, needs almost no setup, and manoeuvres through narrow society gates and half-built access roads where a bigger machine cannot go.
Best for: material handling, PEB and shed erection, pipe laying and tank positioning where a compact pick-and-carry crane is suitable.
When the load gets heavier or the radius gets longer, you need outriggers and a proper boom. Our mobile cranes set up on a firm pad and lift with stability a pick and carry machine cannot match.
Best for: structural steel, precast panels, rooftop plant and tower crane erection.
Our telescopic hydraulic cranes handle the precision end of heavy lifting, where the load must land within centimetres. The boom gives the operator fine control through the whole lift.
Best for: transformer erection, vessel and boiler placement, press installation.
For high-rise construction, a tower crane is the only machine that serves the whole footprint from a single position, every day, for the length of the build. Our crane service in Pune supplies, erects, operates and dismantles it.
Best for: residential towers, commercial high-rise, long-duration infrastructure.
Some of the hardest lifts in Pune happen indoors. These machines move loads horizontally inside factories and assembly halls where a mobile crane has no room to set up and no roof clearance to boom out.
Best for: in-plant machinery shifting, warehouse racking, line relocation.
For soft or uneven ground and sustained heavy lifting, crawler cranes travel with the load on tracks and spread their weight where a wheeled machine would sink or need extensive matting.
Best for: infrastructure work, piling support, long-duration erection.
Not every job at height needs a crane. Our straight-boom and articulated boom lifts give your team a stable working platform instead of a suspended load.
Best for: facade work, MEP installation, painting, signage, warehouse maintenance.
Breakdowns and urgent lifts do not wait for business hours. Our emergency crane service in Pune stays on standby at all times and mobilises on a priority basis regardless of where your site sits.
Best for: breakdown recovery, night shifts, unplanned shutdown lifts.
Tower crane rental is the part of our crane service in Pune that runs longest on a single site. Once a building passes roughly six to eight floors, hiring a mobile crane every time you need a lift stops making sense. You are paying mobilisation again and again, waiting for availability, and losing hours to setup. A tower crane solves that permanently: it stands on site for the whole build, reaches every corner of the footprint from one position, and lifts on demand from the first slab to the last.
We supply both. A self-erecting tower crane suits low-rise and mid-rise sites with tight footprints — it raises itself, needs a smaller base, and comes down quickly at the end of the job. A top-slewing tower crane handles serious high-rise work, climbing with the structure as the floors go up and carrying heavier loads at longer jib radii. Our team recommends the type based on your building height, footprint, heaviest lift and site boundary.
Tower crane hire is a project, not a delivery, so our crane service in Pune handles it end to end. We advise on the foundation or base ballast design, bring in a supporting mobile crane for erection, commission and load-test the machine, supply a licensed tower crane operator for the duration, carry out climbing as the structure rises, run scheduled maintenance and inspections through the hire period, and dismantle and remove everything when your build tops out.
Our tower cranes go up across Pune's high-rise corridors — Punawale, Ravet, Wakad, Moshi, Undri, Wagholi and Kharadi — on residential towers, commercial buildings, IT campuses and mixed-use projects. Because a tower crane sits on site for months, our crane service in Pune plans it around your schedule: slab cycle, peak lifting loads, material staging and the erection window itself.
Planning a tower crane? Send us the building height, footprint dimensions, heaviest single lift and expected project duration. We will come back with the recommended model, jib length, base requirement and a monthly rate including operator — usually within a working day.
Crane capacity is only one part of the decision. The working radius, access, ground condition, job duration and required reach are just as important.
| Crane type | Usually best for | Main advantage | Consider another option when |
|---|---|---|---|
| Hydra / pick-and-carry | Material handling, light structural work, short-radius site lifts | Quick to deploy and manoeuvrable | The load is heavy, the radius is long or the lift needs greater boom reach |
| Mobile crane | Structural steel, precast work, rooftop equipment and general construction lifting | Good balance of reach, capacity and flexibility | The project needs continuous lifting for months or access is too restricted for setup |
| Hydraulic crane | Transformers, heavy machinery, vessels, boilers and precision heavy lifts | Higher capacity and controlled telescopic reach | The job is a simple light lift where a smaller crane can work safely and economically |
| Tower crane | High-rise construction and repeated lifting over a fixed building footprint | Available on site throughout the project | The requirement is short-term, mobile or limited to a small number of lifts |
Important: This is general guidance, not a load chart. Final crane selection should be confirmed against the actual load, radius, height, ground conditions and the manufacturer's rated capacity.
Here is the single thing most people get wrong when they book a crane service in Pune: a crane's rated tonnage is not the weight it can lift on your site. A 20-ton crane lifts 20 tons only at its shortest radius with the boom almost vertical. Push that load out to 12 metres and the safe capacity might drop to 5 tons. Ignore that, and you either book a machine that cannot do the job or pay for one twice the size you need.
Use this as a starting point for your enquiry. Our crane service in Pune confirms the exact machine against the manufacturer's load chart before we quote.
| Load weight | Lift radius | Crane we typically send | Common Pune application |
|---|---|---|---|
| Up to 3 tons | Up to 8 m | 8T hydra crane | Site material handling, small tank placement |
| 3–6 tons | Up to 10 m | 12T–14T hydra crane | PEB erection, pipe laying, DG set placement |
| 6–10 tons | Up to 12 m | 20T–30T mobile crane | Structural steel, rooftop AC and chiller lifting |
| 10–20 tons | 12–18 m | 40T–50T hydraulic crane | Transformer erection, precast panels, machine beds |
| 20–40 tons | 15–25 m | 75T–100T hydraulic crane | Vessel and boiler placement, plant relocation |
| Repeat daily lifts | Full building footprint | Tower crane on monthly hire | High-rise residential and commercial construction |
| 40 tons and above | Project specific | 100T+ hydraulic or crawler crane | Infrastructure, heavy industrial erection |
Send us these and we name the machine within the hour — no site visit needed for straightforward jobs. First, the load weight, including sling, hook block and any lifting beam. Second, the lift radius, from the centre of the crane to the centre of the load in its final position. Third, the lift height and any obstruction the load must clear. Fourth, the ground and access — gate width, surface, overhead cables, and whether the pad carries the outrigger loading.
For complex or tandem lifts, and for every tower crane installation, our engineers visit the site, calculate ground bearing pressure and issue a written lift plan before anything moves. That plan comes as part of the crane service in Pune, not as an extra.
Not sure which crane your lift needs?
Send the load weight, radius and height. We reply with the machine and a firm rate — usually within the hour.
Crane rental rates vary with capacity, booking duration, site location, mobilisation, working hours, rigging requirements and ground conditions. The figures below are indicative planning ranges; the final rate is confirmed after we review the job details.
| Crane type | Indicative rate | Minimum booking |
|---|---|---|
| 8T–14T hydra crane | From ₹1,000 per hour | 4 hours |
| 20T–30T mobile crane | Per 8-hour shift | 1 shift |
| 40T–50T hydraulic crane | Per day | 1 day |
| 75T–200T hydraulic crane | Per day + trailer mobilisation | 1 day |
| Tower crane | Monthly hire + erection & dismantling | 1 month |
| Boom lift / aerial platform | Weekly and monthly contracts | 1 week |
Pricing shown on this page and in the calculator is for initial planning only. Please confirm the current rate, availability, taxes and mobilisation charges before booking.
Want a number for your own job right now? The cost calculator below applies these same bands. For repeat contractors we negotiate annual rate contracts that beat spot hire meaningfully. If your project needs a machine for months rather than days — a tower crane on a high-rise, or a hydra crane on a long site — ask our crane service in Pune for a contract rate instead of booking day by day.
Use the calculator for a quick planning estimate. The final quotation may change after we confirm the load, lift radius, site access, working hours, crane availability and any special rigging requirements.
Every crane service in Pune estimate starts with the base hire for the machine and duration you picked. On top of that it adds mobilisation where your zone attracts it, a trailer charge for machines above 50 tons that travel low-bed, a fifteen percent loading for night and holiday work, and specialised rigging if your lift needs a spreader beam or a tandem pick. Operator wages, a rigger where the job needs one, basic slings and shackles and the working-shift fuel are already inside the base rate — our crane service in Pune never bills those separately.
The range our crane service in Pune shows under the total is deliberate. Two lifts of the same tonnage and duration can differ by ten or fifteen percent once ground conditions, standby time and access are known, so we show you the band rather than a single number we might have to revise. Tower crane hire is the one entry that works differently: the monthly figure covers the machine and the licensed tower crane operator, and the separate erection and dismantling line covers the supporting mobile crane, commissioning and load test at each end of the project.
Industrial and construction sites often require machine, operator and insurance documents before a crane is allowed through the gate. We treat those documents as part of job preparation so your site team can review them before mobilisation.
Our crane service in Pune runs to IS 4573 for mobile crane operation and IS 13367 for safe lifting practice, and our riggers follow ASME B30 for slinging and signalling. On construction sites we work under BOCW Act requirements, which govern worker registration, welfare and site safety. Tower cranes get their own treatment: we commission and load-test the machine after erection, then re-inspect at every climbing stage rather than only at handover.
None of that means much without proof, so every machine carries a current third-party load-test certificate, and we retire slings, shackles and spreader beams on wear rather than waiting for them to fail. A machine should not be dispatched for work if its required certification is out of date.
Ask at enquiry stage and every crane service in Pune booking ships with the whole set, emailed before the machine leaves Hadapsar. Your EHS team gets it in one go instead of chasing us at 7 AM on the day of the lift.
Request the compliance pack
Our crane service in Pune runs seven stages every time, whether it is a two-hour hydra job in Wakad or a tower crane erection in Punawale.
Pune's lifting demand does not spread evenly across the map. It clusters into four bands, and each one asks for something different — a different machine, a different notice period, a different set of gate documents. Here is how our crane service in Pune covers each of them.
Automotive and engineering country, and the busiest belt for our crane service in Pune. It runs on planned shutdowns. We handle new line installation, die and press handling, transformer erection and full plant relocation for the Tier-1 and Tier-2 supplier base.
Dense industrial estates pressed up against fast residential growth. We work here almost daily on in-plant machinery shifting, warehouse racking, structural steel and equipment recovery.
Constant rooftop and facade work — HVAC and chiller lifting, DG set placement, MEP installation, cladding panels and fit-out hoisting, most of it scheduled around campuses that never really close.
Pune's residential and mixed-use construction, and where most of our tower cranes stand. Our yard sits in Hadapsar, which is why these are the fastest addresses on our list.
These are the windows our crane service in Pune commits to on a confirmed booking. Emergency callouts override all of them.
| Zone | Distance from our Hadapsar yard | Standard response | Notice we ask for |
|---|---|---|---|
| Hadapsar, Kharadi, Magarpatta, Wagholi | Under 15 km | 2–4 hours | Same day |
| Pune city, Baner, Katraj, Undri | 15–25 km | 3–5 hours | Same day |
| PCMC, Wakad, Ravet, Punawale, Moshi | 20–30 km | 3–5 hours | Same day |
| Hinjewadi, Pirangut | 25–35 km | 4–6 hours | Same day |
| Chakan, Talegaon, Ranjangaon, Sanaswadi, Shirwal | 35–60 km | Next morning | 1 working day |
| Tower crane erection, anywhere | Site specific | Scheduled | 2–3 weeks |
Do not see your locality above? If your site sits within roughly 40 kilometres of Pune city, our crane service in Pune almost certainly covers it — call and we will confirm the machine, the travel time and whether any mobilisation charge applies before you commit to anything.
Most people do not search for a crane. They search for their problem. Here are the jobs we take on most often.
We move CNC machines, presses, compressors, moulding machines and entire production lines — planning the sequence around your shutdown window and setting equipment back onto anchor bolts to specification.
Tower cranes handle the daily slab-cycle lifting on residential and commercial towers — shuttering, rebar, concrete buckets and material staging — from the first floor to topping out.
Transformers, switchgear panels and DG sets need controlled placement onto plinths with minimal shock loading. Our hydraulic cranes give the fine boom control that job demands.
Commercial buildings across Kharadi, Baner and Hinjewadi call our crane service in Pune for terrace plant lifting, often over live roads. We plan the exclusion zone and timing around building operations.
Columns, trusses, purlins, precast walls and staircases go up faster with a machine matched to the erection sequence. We size the crane to the heaviest member at the longest reach.
Solar EPC contractors book us for module and structure unloading. Process plants book us for storage tank, silo and pressure vessel positioning.
Overturned equipment, failed machinery, and lifts that cannot wait for morning — our emergency crane service in Pune handles these around the clock.
Racking installation, container unloading, dock leveller placement and oversized consignment handling — a steady part of our crane service in Pune across the city's logistics parks.
Booking a crane service in Pune should take minutes, not days. We keep the process short, because you have a site to run.
Load weight, lift radius, lift height and site address, by call or WhatsApp. Photos of the load and the access route help enormously.
For straightforward enquiries, we aim to provide the recommended machine, the rate, what it includes and a realistic arrival window. If the lift needs a site visit, we say so rather than guessing.
Load-test certificate, operator licence, insurance and lift plan go to your EHS team before the machine rolls, so the gate is never the bottleneck.
The operator arrives briefed, runs the toolbox talk with your supervisor, completes the lift, and you sign off on actual hours worked. Any chargeable changes to the agreed scope should be explained before they are added to the invoice.
What matters on a crane job is clear scope, suitable equipment, current documentation and reliable communication.
We publish capacity guidance, rate information, inclusions and exclusions so you can understand the likely scope before requesting a final quotation.
Crane operation requires judgement, communication and familiarity with lifting conditions. We assign operators according to the machine and job requirements.
Equipment is maintained and checked before deployment, with required machine documentation reviewed as part of dispatch preparation.
Our Hadapsar location supports same-day deployment for many smaller-crane enquiries, subject to availability, traffic, permits, site access and crane capacity.
Hydra, mobile, hydraulic, tower, crawler and pick-and-carry options allow the recommendation to follow the job rather than forcing every lift into one machine type.
Depending on the crane and project, hire can be structured by hour, shift, day, week or month, with the applicable minimum booking stated in the quote.
Real feedback from construction firms, factories and contractors who rely on our crane service in Pune for safe, on-time lifting.
★★★★★
"We hired Udaan Crane Service in Pune for heavy machinery shifting, and the service was excellent. The crane arrived on time, the operator was skilled, and all safety measures were followed properly."
Sonu Parmar
★★★★★
"Udaan supported our construction site with hydra crane rental. The team was professional, responsive, and cooperative throughout. The crane was well maintained, and the job was completed smoothly."
Sandeep Borhade
★★★★★
"We needed an urgent crane for heavy lifting at our industrial site, and Udaan arranged it quickly. Their 24/7 crane service is a big help in emergencies, and the operator handled the work safely and efficiently."
Sapna Singh
★★★★★
"Udaan helped us with industrial equipment installation. Their planning and execution were impressive, safety standards were strictly followed, and pricing was transparent with no hidden charges."
Mahesh Borhade
★★★★★
"Excellent experience — we hired a mobile crane for our project and the service was on time and well organised. The operator was experienced, and the lifting work was completed without any issues."
Pavan Sharma
Tap any question to open the answer.
Hydra crane rental in Pune starts from about ₹1,000 per hour with a four-hour minimum. A 20-ton to 30-ton mobile crane runs on an eight-hour shift rate, larger hydraulic cranes are quoted per day, and tower cranes are quoted as a monthly hire plus erection and dismantling. Your final cost depends on tonnage, shift length, distance from our Hadapsar yard and any standby time.
Yes. We supply self-erecting and top-slewing tower cranes for high-rise residential, commercial and infrastructure projects across Pune. The package covers foundation guidance, erection with a supporting mobile crane, monthly hire with a licensed operator, climbing as the structure rises, and dismantling at the end of the project.
You need more capacity than the load weight, because a crane loses capacity as the boom extends. To lift 10 tons at a 6-metre radius, a 20-ton mobile crane usually works. Move the same load out to 12 metres and you need a 40-ton to 50-ton machine. Send us weight, radius and height, and we will match the crane against the actual load chart.
Yes. Our 24/7 crane service in Pune covers night shifts, weekend shutdowns, breakdown recovery and emergency lifts. Call or WhatsApp 9503066820 at any hour and we will confirm the nearest available machine and a realistic arrival time straight away.
Inside Pune city, Hadapsar, Kharadi, Magarpatta and Wagholi smaller cranes can often reach nearby Pune locations within a few hours of a confirmed booking, subject to availability, traffic and site access. For Chakan, Talegaon, Ranjangaon and Shirwal we ask for a day's notice so we can plan the road route. Emergency requests are prioritised based on machine availability and safe mobilisation.
We supply a complete vendor pack: GST and PAN copies, the third-party load-test certificate for the machine, operator licence and medical fitness records, insurance cover note, PF and ESIC details, and a job-specific lift plan with risk assessment. Ask at enquiry stage and we email it before the machine leaves our yard.
Yes. Every crane comes with a trained operator and, where the lift needs one, a rigger. We do not bill operator wages, basic slings and shackles, or mobilisation within our standard Pune service zone as separate line items.
A hydra crane is a compact pick and carry machine that drives with the load and suits tight urban sites and lighter work up to about 14 tons. A mobile crane sets up on outriggers, lifts far more weight at a longer radius, and needs a firm level pad. Hydra cranes cost less per hour; mobile cranes do the heavy work.
Not inside our standard Pune service zone for hydra and smaller mobile cranes. Beyond roughly 40 kilometres from Hadapsar, and for larger machines that travel on a trailer, we add a one-time mobilisation and demobilisation charge. Tower cranes carry a separate erection and dismantling cost. Applicable mobilisation, trailer, erection or dismantling charges should be stated in the quote before confirmation.
Yes, and it is a large part of our work in Chakan and Bhosari. We use pick and carry cranes, hydraulic jacks, skates and rollers for in-plant moves where a mobile crane cannot enter, and we plan the sequence around your shutdown window so production restarts on schedule.
We work to IS 4573 and IS 13367 for mobile crane operation and ASME B30 rigging practice, and we operate under BOCW Act requirements on construction sites. Every machine carries a valid load-test certificate, and every lift starts with a documented lift plan, a toolbox talk and a marked exclusion zone.
We cover Pune city and Pimpri-Chinchwad in full, the Chakan, Talegaon, Ranjangaon and Bhosari MIDC belts, Hinjewadi and Kharadi, and growth corridors like Wakad, Wagholi, Moshi, Ravet, Punawale, Undri and Katraj. Anything within about 40 kilometres of Pune, ask us and we will confirm.
Hiring a crane is not only about the lowest rental figure. The machine must suit the load and radius, the site must be ready for safe setup, and the required documents, operator and mobilisation plan need to be clear before work starts.
Udaan Crane Service supports construction, industrial and commercial lifting across Pune and Pimpri-Chinchwad with hydra, mobile, hydraulic, tower, crawler and pick-and-carry cranes for short jobs and longer project requirements.
For an accurate quote, share the load weight, lift radius, required height, site location and access details. Call 9503066820, send a WhatsApp message or use the enquiry form, and our team will review the requirement and confirm the recommended crane, availability and commercial terms.
Get your crane quote today
Hydra, mobile, hydraulic, tower and crawler cranes across Pune and Pimpri-Chinchwad.
Looking for the most dependable crane rental services in India? We also operate in Mumbai, Hyderabad and Bangalore.
